Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/, use http://www.nexperia.com Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use salesaddresses@nexperia.com (email) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: - (c) NXP N.V. (year). All rights reserved or (c) Koninklijke Philips Electronics N.V. (year). All rights reserved Should be replaced with: - (c) Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia 74LVC1G157-Q100 Single 2-input multiplexer Rev. 2 -- 8 December 2016 Product data sheet 1. General description The 74LVC1G157-Q100 is a single 2-input multiplexer which select data from two data inputs (I0 and I1) under control of a common data select input (S). The state of the common data select input determines the particular register from which the data comes. The output (Y) presents the selected data in the true (non-inverted) form. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V applications. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. Schmitt-trigger action at all inputs makes the circuit highly tolerant to slower input rise and fall times. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from 40 C to +85 C and from 40 C to +125 C Wide supply voltage range from 1.65 V to 5.5 V High noise immunity Complies with JEDEC standard: JESD8-7 (1.65 V to 1.95 V) JESD8-5 (2.3 V to 2.7 V) JESD8B/JESD36 (2.7 V to 3.6 V) 24 mA output drive (VCC = 3.0 V) CMOS low power consumption Latch-up performance exceeds 250 mA Direct interface with TTL levels Inputs accept voltages up to 5 V ESD protection: MIL-STD-883, method 3015 exceeds 2000 V HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 ) Multiple package options 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74LVC1G157GW-Q100 40 C to +125 C SC-88 plastic surface-mounted package; 6 leads SOT363 40 C to +125 C SC-74 plastic surface-mounted package (TSOP6); 6 leads SOT457 74LVC1G157GV-Q100 4. Marking Table 2. Marking Type number Marking code[1] 74LVC1G157GW-Q100 YP 74LVC1G157GV-Q100 YP [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code. 5. Functional diagram , 6 , * 08; < DDF DDF Fig 1. Logic symbol Fig 2. , , IEC logic symbol 6(/(&725 08/7,3/(;(5 2873876 < 6 Fig 3. DDF Functional diagram 74LVC1G157_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 2 of 14 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer 6 , < , DDF Fig 4. Logic diagram 6. Pinning information 6.1 Pinning /9&*4 , 6 *1' 9&& , < DDD Fig 5. Pin configuration SOT363 and SOT457 6.2 Pin description Table 3. Pin description Symbol Pin Description I1 1 data input from source 1 GND 2 ground (0 V) I0 3 data input from source 0 Y 4 multiplexer output VCC 5 supply voltage S 6 common data select input 74LVC1G157_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 3 of 14 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer 7. Functional description Table 4. Function table[1] Inputs Output S I1 I0 Y L X L L L X H H H L X L H H X H [1] H = HIGH voltage level; L = LOW voltage level; X = don't care. 8. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter VCC supply voltage IIK input clamping current VI input voltage IOK output clamping current output voltage VO IO output current ICC supply current IGND ground current Ptot total power dissipation Tstg storage temperature [1] Conditions VI < 0 V [1] Min Max Unit 0.5 +6.5 V 50 - 0.5 +6.5 V mA mA - 50 Active mode [1][2] 0.5 VCC + 0.5 V Power-down mode [1][2] 0.5 +6.5 V - 50 mA - 100 mA 100 - mA - 250 mW 65 +150 C VO > VCC or VO < 0 V VO = 0 V to VCC Tamb = 40 C to +125 C [3] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] When VCC = 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation. [3] For SC-88 and SC-74 packages: above 87.5 C the value of Ptot derates linearly with 4.0 mW/K. 74LVC1G157_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 4 of 14 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer 9. Recommended operating conditions Table 6. Recommended operating conditions Symbol Parameter VCC supply voltage VI input voltage VO output voltage Conditions Min Typ Max Unit 1.65 - 5.5 V 0 - 5.5 V Active mode - - VCC V VCC = 0 V; Power-down mode - - 5.5 V 40 - +125 C - - 20 ns/V - - 10 ns/V Tamb ambient temperature t/V input transition rise and fall rate VCC = 1.65 V to 2.7 V VCC = 2.7 V to 5.5 V 10. Static characteristics Table 7. Static characteristics At recommended operating conditions. Voltages are referenced to GND (ground = 0 V). Symbol Parameter VIH VIL VOH VOL HIGH-level input voltage LOW-level input voltage 40 C to +85 C Conditions VCC = 1.65 V to 1.95 V 74LVC1G157_Q100 Product data sheet Unit Min Max Min Max 0.65VCC - - 0.65VCC - V VCC = 2.3 V to 2.7 V 1.7 - - 1.7 - V VCC = 2.7 V to 3.6 V 2.0 - - 2.0 - V VCC = 4.5 V to 5.5 V 0.7VCC - - 0.7VCC - V VCC = 1.65 V to 1.95 V - - 0.35VCC - VCC = 2.3 V to 2.7 V - - 0.7 - 0.7 V VCC = 2.7 V to 3.6 V - - 0.8 - 0.8 V VCC = 4.5 V to 5.5 V - - 0.3VCC - 0.3VCC V VCC 0.1 - - VCC 0.1 - V IO = 4 mA; VCC = 1.65 V 1.2 1.54 - 0.95 - V IO = 8 mA; VCC = 2.3 V 1.9 2.15 - 1.7 - V IO = 12 mA; VCC = 2.7 V 2.2 2.50 - 1.9 - V IO = 24 mA; VCC = 3.0 V 2.3 2.62 - 2.0 - V IO = 32 mA; VCC = 4.5 V 3.8 4.11 - 3.4 - V IO = 100 A; VCC = 1.65 V to 5.5 V - - 0.10 - 0.10 V IO = 4 mA; VCC = 1.65 V - 0.07 0.45 - 0.70 V IO = 8 mA; VCC = 2.3 V - 0.12 0.30 - 0.45 V HIGH-level output VI = VIH or VIL voltage IO = 100 A; VCC = 1.65 V to 5.5 V LOW-level output voltage 40 C to +125 C Typ[1] 0.35VCC V VI = VIH or VIL IO = 12 mA; VCC = 2.7 V - 0.17 0.40 - 0.60 V IO = 24 mA; VCC = 3.0 V - 0.33 0.55 - 0.80 V IO = 32 mA; VCC = 4.5 V - 0.39 0.55 - 0.80 V All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 5 of 14 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer Table 7. Static characteristics ...continued At recommended operating conditions. Voltages are referenced to GND (ground = 0 V). Symbol Parameter 40 C to +85 C Conditions Unit Min Max Min Max - 0.1 1 - 1 A II input leakage current IOFF power-off leakage VCC = 0 V; VI or VO = 5.5 V current - 0.1 2 - 2 A ICC supply current VI = 5.5 V or GND; IO = 0 A; VCC = 1.65 V to 5.5 V - 0.1 4 - 4 A ICC additional supply current per pin; VCC = 2.3 V to 5.5 V; VI = VCC 0.6 V; IO = 0 A - 5 500 - 500 A CI input capacitance VCC = 3.3 V; VI = GND to VCC - 2.5 - - - pF [1] VI = 5.5 V or GND; VCC = 0 V to 5.5 V 40 C to +125 C Typ[1] All typical values are measured at Tamb = 25 C. 11. Dynamic characteristics Table 8. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for load circuit see Figure 7. Symbol Parameter tpd 40 C to +85 C Conditions propagation delay I0, I1 to Y; see Figure 6 Max Min Max 1.5 4.3 11.0 1.5 13.0 Unit ns VCC = 2.3 V to 2.7 V 1.0 2.9 6.1 1.0 7.6 ns VCC = 2.7 V 1.0 3.1 5.6 1.0 7.0 ns VCC = 3.0 V to 3.6 V 1.0 2.7 5.0 1.0 6.3 ns 0.5 2.2 4.0 0.5 5.0 ns VCC = 1.65 V to 1.95 V 1.5 4.3 11.0 1.5 13.0 ns VCC = 2.3 V to 2.7 V 1.0 2.9 6.9 1.0 8.6 ns VCC = 2.7 V 1.0 3.3 5.9 1.0 7.4 ns VCC = 3.0 V to 3.6 V 1.0 2.9 5.0 1.0 6.3 ns VCC = 4.5 V to 5.5 V 0.5 2.3 4.0 0.5 5.0 ns - 18 - - - pF VCC = 4.5 V to 5.5 V S to Y; see Figure 6 power dissipation capacitance Typ[1] [2] VCC = 1.65 V to 1.95 V CPD 40 C to +125 C Min VI = GND to VCC; VCC = 3.3 V [2] [3] [1] Typical values are measured at Tamb = 25 C and VCC = 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively. [2] tpd is the same as tPLH and tPHL. [3] CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD VCC2 fi N + (CL VCC2 fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in Volts; N = number of inputs switching; (CL VCC2 fo) = sum of the outputs. 74LVC1G157_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 6 of 14 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer 12. Waveforms 9, 90 ,,6LQSXW *1' W3+/ W3/+ 92+ <RXWSXW 90 92/ DDF Measurement points are given in Table 9. VOL and VOH are typical output voltage levels that occur with the output load. Fig 6. Data inputs (I0, I1) and common data select input (S) to output (Y) propagation delays Table 9. Measurement points Supply voltage Input Output VCC VM VM 1.65 V to 1.95 V 0.5VCC 0.5VCC 2.3 V to 2.7 V 0.5VCC 0.5VCC 2.7 V 1.5 V 1.5 V 3.0 V to 3.6 V 1.5 V 1.5 V 4.5 V to 5.5 V 0.5VCC 0.5VCC 74LVC1G157_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 7 of 14 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer 9(;7 9&& * 9, 5/ 92 '87 57 &/ 5/ PQD Test data is given in Table 10. Definitions for test circuit: RL = Load resistance. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance; should be equal to the output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times. Fig 7. Test circuit for measuring switching times Table 10. Test data Supply voltage Input VCC VI tr = tf CL RL tPLH, tPHL 1.65 V to 1.95 V VCC 2.0 ns 30 pF 1 k open 2.3 V to 2.7 V VCC 2.0 ns 30 pF 500 open 2.7 V 2.7 V 2.5 ns 50 pF 500 open 3.0 V to 3.6 V 2.7 V 2.5 ns 50 pF 500 open 4.5 V to 5.5 V VCC 2.5 ns 50 pF 500 open 74LVC1G157_Q100 Product data sheet Load All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 VEXT (c) NXP Semiconductors N.V. 2016. All rights reserved. 8 of 14 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer 13. Package outline 3ODVWLFVXUIDFHPRXQWHGSDFNDJHOHDGV 627 ' % \ ; $ ( +( Y 0 $ 4 SLQ LQGH[ $ $ H F ES /S Z 0 % H GHWDLO; PP VFDOH ',0(16,216 PPDUHWKHRULJLQDOGLPHQVLRQV 81,7 $ $ PD[ ES F ' ( H H +( /S 4 Y Z \ PP 287/,1( 9(56,21 5()(5(1&(6 ,(& -('(& -(,7$ 6& 627 Fig 8. (8523($1 352-(&7,21 ,668('$7( Package outline SOT363 (SC-88) 74LVC1G157_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 9 of 14 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer 3ODVWLFVXUIDFHPRXQWHGSDFNDJH 7623 OHDGV ' 627 % $ ( \ +( ; Y 0 $ 4 SLQ LQGH[ $ $ F /S H ES Z 0 % GHWDLO; PP VFDOH ',0(16,216 PPDUHWKHRULJLQDOGLPHQVLRQV 81,7 $ $ ES F ' ( H +( /S 4 Y Z \ PP 287/,1( 9(56,21 5()(5(1&(6 ,(& -('(& -(,7$ 6& 627 Fig 9. (8523($1 352-(&7,21 ,668('$7( Package outline SOT457 (SC-74) 74LVC1G157_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 10 of 14 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer 14. Abbreviations Table 11. Abbreviations Acronym Description CMOS Complementary Metal Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model MIL Military TTL Transistor-Transistor Logic 15. Revision history Table 12. Revision history Document ID Release date Data sheet status Change notice Supersedes 74LVC1G157_Q100 v.2 20161208 Product data sheet - 74LVC1G157_Q100 v.1 Modifications: 74LVC1G157_Q100 v.1 74LVC1G157_Q100 Product data sheet * Table 7: The maximum limits for leakage current and supply current have changed. 20130121 Product data sheet - All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 - (c) NXP Semiconductors N.V. 2016. All rights reserved. 11 of 14 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer 16. Legal information 16.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 16.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 16.3 Disclaimers Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. 74LVC1G157_Q100 Product data sheet Suitability for use in automotive applications -- This NXP Semiconductors product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 12 of 14 74LVC1G157-Q100 NXP Semiconductors Single 2-input multiplexer No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Translations -- A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. 16.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 17. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com 74LVC1G157_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 8 December 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 13 of 14 NXP Semiconductors 74LVC1G157-Q100 Single 2-input multiplexer 18. Contents 1 2 3 4 5 6 6.1 6.2 7 8 9 10 11 12 13 14 15 16 16.1 16.2 16.3 16.4 17 18 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3 Functional description . . . . . . . . . . . . . . . . . . . 4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Recommended operating conditions. . . . . . . . 5 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5 Dynamic characteristics . . . . . . . . . . . . . . . . . . 6 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11 Legal information. . . . . . . . . . . . . . . . . . . . . . . 12 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Contact information. . . . . . . . . . . . . . . . . . . . . 13 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP Semiconductors N.V. 2016. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 8 December 2016 Document identifier: 74LVC1G157_Q100